| Calculation factor Y0 | 2 |
| d | 260.35 mm |
| Calculation factor Y2 | 3 |
| r3,4 min. | 3.3 mm |
| Basic dynamic load rating C | 4130 kN |
| r1,2 min. | 6.4 mm |
| Thrust factor K | 1.76 |
| Basic static load rating C0 | 8000 kN |
| Calculation factor Y1 | 2 |
| T | 317.5 mm |
| Design variant/feature | TQO/GWI |
| D | 422.275 mm |
| Fatigue load limit Pu | 710 kN |
| Mass bearing | 180 kg |
| Calculation factor e | 0.33 |
| Comparative radial load rating CF | 1100 kN |
| B | 314.325 mm |
| Comparative axial load rating CFa | 179 kN |
| d1 ≈ | 298 mm |
| D1 ≈ | 370 mm |
HMS5 SKF CR SEALS SKF are basic numbers only. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | Size | Noun | Weight | UNSPSC | Actual Width | Housing Bore | Lip Material | Lip Retainer |
| CR20X35X10 HMS5 RG | SKF | 20X35X10 | - | 0.05 | - | - | - | - | - |
| 38X58X10 HMS5RG | SKF | - | - | 0.03 | - | - | - | - | - |
| SKF 80x100x10 HMS5V | SKF | - | - | —— | - | - | - | - | - |
| SKF 100x130x12 HMS5 V | SKF | - | - | — — | - | - | - | - | - |
| 18X30X7 HMS5 RG | SKF | - | Seal | - | 31411705 | 0.276 Inch / 7 Millimeter | 1.181 Inch / 30 Millimeter | Nitrile | Carbon Steel Garter |
| 28X52X10 HMS5 RG | SKF | - | Seal | - | 31411705 | 0.394 Inch / 10 Millimeter | 2.047 Inch / 52 Millimeter | Nitrile | Carbon Steel Garter |
| 65X95X10 HMS5 RG | SKF | - | Seal | - | 31411705 | 0.394 Inch / 10 Millimeter | 3.74 Inch / 95 Millimeter | Nitrile | Carbon Steel Garter |
| 20X32X7 HMS5 RG | SKF | - | Seal | - | 31411705 | 0.276 Inch / 7 Millimeter | 1.26 Inch / 32 Millimeter | Nitrile | Carbon Steel Garter |
| 12X22X7 HMS5 RG | SKF | - | Seal | - | 31411705 | 0.276 Inch / 7 Millimeter | 0.866 Inch / 22 Millimeter | Nitrile | Carbon Steel Garter |
| 15655 SKF SKF RADIAL SHAFT SEAL | Ba min.:26 mm; Reference speed:240 r/min; B1:467 mm; d3:900 mm; D:1150 mm; Da max.:1110 mm; Calculation factor e:0.28; db min.:745 mm; B2:106 mm; Calculation factor Y0:2.5; Limiting speed:450 r/min; d2 ≈:851 mm; Calculation factor Y1:2.4; Calculation factor Y2:3.6; r1,2 min.:9.5 mm; ra max.:8 |
| 14864 SKF SKF SHAFT SEALS | Grease Limiting Speed (r/min):1800; Weight:3.48 KGS; Availability:In Stock; Cage Type:Steel; B:33mm; Seals or Shields:Two Rubber Seals; SKU:6028dduc3-nsk; D:210mm; Static Load Rating (kN):109; Dynamic Load Rating (kN):110; Clearance:C3; d:140mm; |
| 18581 SKF SKF INDUSTRIAL SEALS | Mass rod end:4.1 kg; α:6 °; C1 max.:31 mm; l3 min.:68 mm; w:60 mm; l4 max.:219 mm; h1:160 mm; d4 ≈:70 mm; l5 ≈:30 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:114 mm; Basic static load rating C0:270 kN; d:50 mm; dk:66 mm; l7 min.:60 mm; Basic dynamic load rating C:156 k |
| 13557 SKF SKF LIP SEAL | Clearance:Standard; Cage Type:Steel; Seals or Shields:Open Type; D:4mm; Weight:0.20 KGS; SKU:f681x-zen; Availability:In Stock; d:1.5mm; B:1.2mm; |
| 35066 SKF SKF LIP SEAL | B:34 mm; B1:122 mm; G:M 180x3; Hydraulic nut:HMV 36 E; Mass adapter sleeve assembly:6.75 kg; d1:165.1 mm; d3:230 mm; d:180 mm; |
| 47697 SKF SKF SEAL | Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:149.1 N·m; P150°:28.5 kN; Initial grease fill:218.29 g; H:180.975 mm; H2:31.75 mm; A1:88.9 mm; PG:1/8 NPT; Mass pillow block:17.9 kg; N1:22.225 mm; R2:22.225 mm; Max. speed for PosiTrac Plus seal:1950 r/min; P180°:34.7 kN; |
| 1963 SKF CR SEAL | Mass rod end:7.1 kg; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:400 kN; d:60 mm; l4 max.:296 mm; Material constant KM:330; G:M 60x4; w:70 mm; α:6 °; l5 ≈:35 mm; d4 ≈:82 mm; d2 max.:137 mm; l3 min.:70 mm; dk:80 mm; l7 min.:70 mm; Basic dynamic load rati |
| 18708 SKF SKF RADIAL SHAFT SEAL | d1 ≈:695 mm; d:600 mm; B1:31 mm; B2:55 mm; Mass angle ring:27.5 kg; r3,4 min.:6 mm; |
| 3187 SKF DOUBLE LIP OIL SEAL SKF | Basic static load rating C0:2550 kN; D1 ≈:289 mm; Misalignment factor k1:0.115; Mass bearing:33.5 kg; B:104 mm; Limiting speed:190 r/min; d2 ≈:228 mm; d:190 mm; D:320 mm; r1,2 min.:3 mm; Operating clearance factor k2:0.096; s2 max.:9.1 mm; ra max.:2.5 mm; Basic dynamic load rating C:1700 |
| 9838 SKF SKF OIL SEAL | d1:130 mm; Mass shaft washer:1.11 kg; B:14 mm; d:60 mm; r1,2 min.:1.5 mm; |
| 35002 SKF SKF OIL SEAL | PG:1/4 NPT; Taconite seal (db shaft position):TER 121; da:110 mm; Taconite seal (dc shaft position):TER 113; P150°:50.7 kN; J min.:320.675 mm; J1:69.85 mm; Max. speed for Taconite seal:625 r/min; Mass pillow block:30.8 kg; End plug (suffix Y):EPR 15; N1:22.225 mm; Initial grease fill:481.95 g; R |
| 19229 SKF SKF INDUSTRIAL SEALS | D:62mm; Seals or Shields:Open Type; B:18.25mm; Availability:In Stock; Grease Limiting Speed (r/min):6700; Weight:0.02 KGS; Static Load Rating (kN):47.5; SKU:30305-ntn; Cage Type:Steel; Dynamic Load Rating (kN):48.5; Oil Limiting Speed (r/min):8900; d:25mm; Clearance:Standard; |
HMS5 SKF CR SEALS SKF Video
Radial shaft seals for general industrial applications
Radial shaft seals for general industrial applications - 30x42x7 HMS5 RG .... 30x42x7 HMS5 RG. US stock number, 692351. Design, HMS5. Lip material, RG
SKF 40X62X7 HMS5 RG Rotary Shaft Seal, Dual Lip with
SKF 40X62X7 HMS5 RG Rotary Shaft Seal, Dual Lip with Spring, 40 mm Bore, 62 mm OD, Nitrile: Amazon.com: Industrial & Scientific
Radial shaft seals for general industrial applications
Radial shaft seals for general industrial applications - 55x72x8 HMS5 RG .... 55x72x8 HMS5 RG. US stock number, 564148. Design, HMS5. Lip material, RG
Radial shaft seals for general industrial applications
Radial shaft seals for general industrial applications - 25x42x7 HMS5 RG .... 25x42x7 HMS5 RG. US stock number, 692315. Design, HMS5. Lip material, RG
Radial shaft seals for general industrial applications
Type of outside diameter, Rubber metal reinforced. Lip material, Nitrile rubber (NBR). Seal design, HMS5. Compliance with standard, ISO 6194; DIN 3760
HMS5 and HMSA10 seals
SKF metric rubber outside diameter radial shaft seals, HMS5 (fig 1) and HMSA10 (fig 2), are designed in accordance with ISO 6194-1 and DIN 3760 for use in a
Why SKF? Radial shaft seals HMS5 and HMSA10
The metric line of SKF rubber outside diameter radial shaft seals,. HMS5 and HMSA10, is designed to provide optimized performance under these conditions
Radial shaft seals HMS5 and HMSA10
Getting maximum bearing performance with minimum bearing maintenance is tough in any application. SKF HMS5 and HMSA10 radial shaft seals deliver it in
55x72x8 HMS5 RG
Type of outside diameter, Rubber metal reinforced. Lip material, Nitrile rubber (NBR). Seal design, HMS5. Compliance with standard, ISO 6194; DIN 3760